Back

How do I fix the error: “The program can’t start because NiViSv32.dll is missing”

June 12, 2024

FDCS

Symptoms / Solutions:

I installed the FDCS on a new Windows 7 computer. Then I get the following error message.

It is because the VISA is not installed.

Install NI VISA or Agilent VISA, which can be found in the FDCS DVD or online. NI VISA and Agilent VISA should not be both installed on the same system.

The installers are located on the DVD in directory: \GPIB&VISA

Or you can download NI VISA directly from the link below:

http://www.ni.com/download/ni-488.2-16.0.0/6132/en/

Keywords: VISA Installation, NI, Agilent, NiViSv32.dll is missing

Last date modified: 2017 May 03

June 12, 2024

I have a Focus Cal Kit – What are the standard definitions?

June 12, 2024

How do I define my Focus calibration kit in my PNA/PNA-X?

June 12, 2024

How do I change the IP address of tuner?

June 12, 2024

Communication between my tuner and computer does not work.

June 12, 2024

What is the fastest way to calibrate a tuner for a large number of frequencies?

June 12, 2024

How do I fix the error: “The program can’t start because NiViSv32.dll is missing”

I have a Focus Cal Kit – What are the standard definitions?

How do I define my Focus calibration kit in my PNA/PNA-X?

How do I change the IP address of tuner?

Communication between my tuner and computer does not work.

What is the fastest way to calibrate a tuner for a large number of frequencies?

Tuner calibration using a R&S ZNB, The vna correction is turned off