iTuner Operation and Programming Manual

June 12, 2024

Tuner Programming


The iTuner can be used as a standalone instrument. The iTuner can be calibrated using the FDCS software, and these calibrations can be uploaded to the tuner.

The tuner can then be used with any computer, to control via telnet or the iTunerX activeX programming library.

The following manual applies to any fundamental tuner that can be controlled via network cable. It does not apply to MPTs or other multi-probe tuners.

Version 3.3, Nov. 2016


Keywords: iTuner, iTunerX, iCCMT, programming

Last date modified:  Oct. 13, 2017