Symptoms / Solutions:
To convert LPWAVE or LPCWAVE to MDIF – Microwave Office format do the following:
- Go to “Utilities” menu and select “File Converter…”
- Select file LPWAVE or LCWAVE file you want to convert
- Select “Microwave Office Format” in the Format combo box.
- Select “AB Wave” in “Output Type” combo box
- The MDIF file format for Microwave Office (AWR) requires that the original file has Psource[dBm] parameter measured. Also If the measurement is done at F0 frequency Target@GL@F0 and TaregtPhiL@F0[deg] is required for Load and Target@GS@F0 and TaregtPhiS@F0[deg] for source. Table below summerizes target parameters required for a specific frequency and side of the measurement.
- Click on “Convert” button to generate MDIF (.mdf) file
Keywords: MDIF, AWR, convert, file, converter, LPWAVE, LPCWAVE
Last date modified: 27 Feb 2017
Ruggedness
Pulsed IV Systems
Device Modeling