Symptoms / Solutions:
- Click Start, then in the “Search programs and files” bar you type “telnet 10.0.0.1” for the load tuner or “telnet 10.0.0.2” for the source tuner.
- One command window will open as shown below.
- Type “echo” to eliminate double display of each character.
- Type “config?” to see the tuner information.
- You can find the IP information of the tuner then.
- Change the IP address of the tuner. If you want to change the IP address of the tuner to 10.0.0.3, type “IP_SET 10.0.0.3”. An “IP address saved. Reboot!!!!” message will be shown. To complete IP address changing operation, reboot your tuner.
- After rebooting the tuner, you can verify your tuner’s IP address is changed or not. As before, in the “Search programs and files” bar, you type “telnet 10.0.0.3”.
Keywords: IP address, Tuner
Last date modified: 06 March 2017
Ruggedness
Pulsed IV Systems
Device Modelling