Back

Data Explorer incorrectly plots contour data as phase sweep data

June 12, 2024

Data Explorer

Symptoms / Solutions:

Starting with FDCS software version 3.4.1.0 it is possible to setup Data Explorer to turn off the phase sweep detection. The reason to do this is that sometimes Data Explorer incorrectly detects load pull data as a phase sweep when it is actually a Contour.

To turn phase sweep detection off, go to Tools->Options… menu. In the Options dialog box in the General tab, disable Apply Contour Filter. Phase sweep data detection check box. Reopen the file.

Additional Information:

Keywords: data explorer, contour, phase sweep

Last date modified: 23/03/2017

June 12, 2024

I have a Focus Cal Kit – What are the standard definitions?

June 12, 2024

How do I define my Focus calibration kit in my PNA/PNA-X?

June 12, 2024

How do I change the IP address of tuner?

June 12, 2024

Communication between my tuner and computer does not work.

June 12, 2024

What is the fastest way to calibrate a tuner for a large number of frequencies?

June 12, 2024

Data Explorer incorrectly plots contour data as phase sweep data

I have a Focus Cal Kit – What are the standard definitions?

How do I define my Focus calibration kit in my PNA/PNA-X?

How do I change the IP address of tuner?

Communication between my tuner and computer does not work.

What is the fastest way to calibrate a tuner for a large number of frequencies?

Tuner calibration using a R&S ZNB, The vna correction is turned off